大数据时代大学生个人隐私保护问题研究

伴随着互联网+的风生水起,信息量暴增的大数据时代应运而来,"网络原住民"大学生不可避免、理所当然地处于大数据洪流之中,但也为其个人隐私保护带来了极大挑战。文章针对大数据带来的安全隐私问题,指出大学生个人隐私泄露的可能原因,提出可以采取的个人隐私保护措施,给出大数据时代隐私保护几种技术,期望能给相关人士提供有效参考。     

Polynomial filtering for nonlinear stochastic systems with state‐ and disturbance‐dependent noises

This article is concerned with the polynomial filtering problem for a class of nonlinear stochastic systems governed by the Itô differential equation. The system under investigation involves polynomial nonlinearities, unknown‐but‐bounded disturbances, and state‐ and disturbance‐dependent noises ((x,d)‐dependent noises for short). By expanding the polynomial nonlinear functions in Taylor series around the state estimate, a new polynomial filter design method is developed with hope to reduce the conservatism of the existing results. In virtue of stochastic analysis and inequality technique, sufficient conditions in terms of parameter‐dependent linear matrix inequalities (PDLMIs) are derived to guarantee that the estimation error system is input‐to‐state stable in probability. Moreover, the desired polynomial matrix can be obtained by solving the PDLMIs via the sum‐of‐squares approach. The effectiveness and applicability of the proposed method are illustrated by two numerical examples with one concerning the permanent magnet synchronous motor.     

ASME Ⅱ卷D篇表U数据作为设计校核中材料验收标准存在问题及探讨

ASME标准钢板对于短时高温抗拉数据无规定,但设备设计人员在校核时又要用到此数据,于是有些设计文件在技术要求中将ASME II卷表U的数据作为材料验收的标准。针对此种做法引发的争议及涉及的主要问题进行试验验证和分析探讨。研究结果表明,ASME II卷D篇表U中的数据是基于室温抗拉强度保证值,并根据拟合曲线将室温保证值提高了10%得到的,实测数据与ASME规范数据不一致,部分材料在250~350℃存在动态应变时效现象,但仍不满足设计要求。材料经模拟焊后热处理后性能下降,难以到达交货态的要求。给出了短时高温抗拉强度的选用建议。     

浅谈不同给液方式在铜电解车间的应用

不同给液方式对铜电解过程中有重要的影响,不同的循环方式会影响槽内温度分布、电解液成分及阳极泥沉降等,因此,根据铜电解生产不同情况的需要,分析对比了多种给液方式在贵冶电解车间的应用,总结了这几种给液方式的优缺点和适用条件。     

一种压电半导体纳米线的热电耦合性能研究

采用有限元分析方法,研究了一种n型压电半导体纳米线(氧化锌)的电热耦合性能,分析了外部温度对氧化锌纳米线内部机械场、电场及电流场分布的影响,并讨论了本构方程线性化对电学参数的影响。研究结果表明,温度对氧化锌纳米线的电场、载流子浓度和电流密度影响很大,采用线性本构和非线性本构求得的电场、电子浓度和电流密度最大相差分别为24%,32%和68%,基于非线性本构分析压电半导体的电学性能会引起很大误差。该研究结果可为压电半导体器件利用温度调控电场、电流提供理论依据。     

一种基于深度森林的恶意代码分类方法

针对当前恶意代码静态分析方法精度不足的问题，将恶意代码映射为无压缩的灰度图像，然后根据图像变换方法将图像变换为恒定大小的图像，使用方向梯度直方图提取图像的特征，最后提出一种基于深度森林的恶意代码分类方法.实验中选择不同家族的多个恶意代码样本进行分类，验证了该方法的有效性，并且实验结果优于近期提出的SPAM-GIST方法.     

中压进汽腔的流场数值模拟比较

通过数值模拟计算,对中压对称进汽和切向进汽两种结构的流场进行了分析比较,结果表明,单一切向进汽腔的总压损失更小,出口汽流角的周向分布均匀度更好。更进一步,为整体评估中压进汽腔的流场以及对叶片级的流动影响,对中压进汽腔及第1级叶片的整体流体域流场情况进行了分析比较,结果表明,采用大几何角静叶的切向进汽腔气动性能最优;当采取切向进汽腔时,需合理选择第1级静叶几何角并耦合计算,才能实现进汽腔的气动优化。     

新时代背景下电力精准扶贫模式研究及建议

发挥电力行业优势特点,开展电力精准扶贫,对打赢脱贫攻坚战具有十分重要的作用,并能够助推脱贫攻坚与乡村振兴战略有效衔接.本文从电力扶贫在脱贫攻坚的重要作用出发,以“三聚焦”“三优先”“三模式”“三保障”为指引,详尽梳理并总结了电力精准扶贫主要模式和经验.在此基础上,深刻剖析了当前电力扶贫面临的困难及问题,提出电力精准扶贫的策略,以期为下一步开展电力精准扶贫提供参考与借鉴.     

Effect of high temperature and separated combustion on SO2 release characteristics during coal combustion under O2/CO2 atmosphere

This paper studied the effect of high temperature (up to 1873K) and separated combustion mode (volatile combustion and char combustion are separated) on SO₂ release characteristics during pulverized coal combustion under O₂/CO₂ atmosphere. Coal combustion experiments were conducted at different combustion environment temperatures utilizing a high temperature fixed-bed setup. The results show that as temperature rises, the SO₂ release curve is transformed from a single-peak process to a double-peak process. In separated combustion, temperature has little effect on the volatile-SO₂ (SO₂ released during volatile combustion) but brings about a significant effect on char-SO₂ (SO₂ released during char combustion). Char-SO₂ release amount and the ratio of it to fuel-SO₂ release amount (total SO₂ released during coal combustion) increase with temperature rising. The increase of temperature leads to a dramatic decreasing of sulphur mass fixed in the ash and causes SO₂ release amount to rise when temperature is lower than 1573 K. Separated combustion causes a higher SO₂ release amount than coupled combustion (the same as conventional combustion, volatile combustion and char combustion are simultaneous). Thermochemistry equilibrium composition calculation results show that alkali metals and alkaline-earth metals are significant in sulphur retention. CaSO₄ and Na₂SO₄ are the main sulphates at high temperatures.     

南海北部陆坡天然气水合物成藏特征研究进展分析

南海北部陆坡区域构造地质控制着气源、流体疏导体系、富集空间及储层物性特征,因此,东沙海域、神狐海域、西沙海槽和琼东南盆地的水合物成藏条件及控制因素具有明显差异性。东沙海域深部气体可沿断层、裂缝、不整合面、砂岩疏导层和气烟囱等通道向上运移,并形成天然气水合物,具有渗漏型水合物产出特征;神狐海域水合物成藏与规模巨大的泥底辟活动相关,并与布莱克海台天然气水合物产出特征具有相似性;琼东南盆地中央坳陷带内为天然气水合物发育的重点区,底辟、泥火山或麻坑构造与天然气水合物发育密切相关。